Core Casting Block - 5.5mm or 7/32"

Core Casting Block - 5.5mm or 7/32"

SKU: CC-5.5
  • The core casting block is the ultimate tool to recycle your used pellets, slugs to make a solid core of lead to use for swaging.
  • Recommeded to purchase a smaller diameter core for swaging.
  • Purchase a 4.5mm or 3/16" core casting block to use with a 5.525mm or 0.22" cavity SOC set.
  • Adjustable pin lengths can help acheive the required grain size of lead core, thus minimizing wastage during swaging.
  • Made from hardened tool steel.
  • Available in diameters 3.5, 4.5, 5.5, 6.5 and 7.5mm or 1/8", 3/16", 7/32", 1/4" ,5/16".
  • External furnace and pouring equipments required to use with the core casting block.
  • Pricing includes premium tracked and traced shipping.
  • All items are made to order and may take from 7-25 days for dispatch.
  • How to use the kit:

    • Ensure proper use of PPE when working with hot surfaces.
    • Mount the core cast in a gripping vise or through the holes drilled on the handle.
    • Make sure the lead is viscous enough to flow through the cavities and fil them completely.
    • Adjust the ejector pins using the screw setting provided to set the desired length of cores.
    • Set the sprue in place to begin the pouring.
    • Once the sprue is in place begin with the pouring till the cavity fills up, simultaneously fill the remaining cavities.
    • Once the lead solidifies, move the sprue, which will also trim the lead blanks, and then use a rubber mallet or a hammer and hit the base plate on which the ejector pins are mounted to eject the cores from the main block.
    • Clean the cavities if required incase of any lead fragments that may have been left over during the ejection process.
275,00$ Precio
250,00$Precio de oferta